Seco-Larm – 5D1Q – Access Control Power Supply – New Larger Enclosure!

New Larger Enclosure! 1413/16″x145/16″x41/8″ (377x363x105 mm)​The SECO-LARM EAP-5D1Q and EAP-5D5Q power supplies are specifically designed for an access control system’s electronic locks and accessories. These power supplies centralize the power sources of access control equipment. They include two supervision relays that can be used to integrate with other systems such as an alarm control panel. Robust fault response and indication also includes gradual shutdown on output overload as well as immediate shutdown on output short, signalled by flashing red LED and with auto-recovery once output short or overload is removed.FeaturesAC Power failure supervision relayBattery failure / low battery supervision relayAuxiliary output relayRelays rated 3A@24VDC, 3A@120VACAdjustable voltage range to compensate for voltage dropBuilt-in backup battery charger (battery not included)Selectable 2.2k 9 End-of-Line (EOL) resistor for AC failure andbattery failure supervision relays via DIP switchSelectable delay timer (5 seconds, 5 minutes, 5 hours) for ACfailure supervision relay via DIP switchLED Status indicator for AC input, DC output and channel outputsPowerField selectable for 12VDC or 24VDC outputOperating Input voltage: 110~240 VACField-selectable 12 or 24 VDC outputTotal continuous output current: 5A@12VDC, 2.5A@24VDCAC Input fuse rated at 3.15AEnclosureHeavy-duty steel case with ventilation holesEnclosure large enough to fit two (2) 12V/12Ah batteriesRemovable steel cover for easy access to power connections6ft Power cord and battery leads includedDimensions: 1413/16″x145/16″x41/8″ (377x363x105 mm)Input Voltage110~240VACOutput Voltage12 or 24VDC selectable via DIP switchAdjustable Output Voltage Range12~13 @ 12VDC setting, via VR switch, 23~25 @ 24VDC setting, via VR switchNumber of Outputs1Total Supply Current5A@12VDC / 2.5A@24VDCInput Fuse Rating3.15A ( glass fuse, AC)LED Status IndicatorAC input ( Green ), DC Output ( Red )End-of-Line Resistor (EOL)Selectable ON ( 2.2KΩ) or OFF via DIP switchAC-Fail Relay Delay TimerSelectable @ 5sec, 5min or 5hr via DIP switchSupervision RelaysContact Rating: 3A@24VDC Dry Relay OutputDownloadDatasheetManual