Seco-Larm – 1D1Q – Access Control Power Supply

SLM-EAP-1D1QThe SECO-LARM EAP-1D1Q power supplies are specifically designed for an access control system’s electronic locks and accessories. These power supplies centralize the power sources of access control equipment. They include two supervision relays that can be used to integrate with other systems such as an alarm control panel. Robust fault response and indication also include gradual shutdown on output overload as well as immediate shutdown on output short, signaled by a flashing red LED and with auto-recovery once output short or overload is removed.FeaturesInput 110~240 VAC, fused at 3.15AFiltered and electronically regulated outputAC Input and DC output LED status indicatorsAdjustable output voltage to compensate for voltage dropAC power failure supervision relayOvercurrent fuse-protected AC inputAutomatic shutdown for overcurrent / short-circuit protection12/24 VDC Outputs, field selectableBattery failure / low battery supervision relayBuilt-in backup battery charger (Batteries not included)Automatically switch to backup battery if AC failsSelectable 2.2k3 End-of-Line (EOL) resistor for AC failure and battery failure supervision relaysSelectable delay timer (5sec, 5min, 5h) for AC failure supervision relay via DIP switchPowerOperating Input voltage: 110~240 VACField-selectable 12 or 24 VDC outputTotal continuous output current: 3A@12VDC, 1.5A@24VDCAC Input fuse rated at 3.15A ( glass fuse, AC)EnclosureHeavy-duty steel case with removable cover for easyaccess to connectionsVentilation holes to prevent heat buildupRoom for one 7Ah battery or two 4AH batteries (Batteries not included)Knockouts for power connections and optional cam lockDimensions: 73/4 “x101/16″x39/16” (197x255x91 mm)SpecificationsInput Voltage110~240VACOutput Voltage12 or 24VDC selectable via DIP switchAdjustable Output Voltage Range12~13 @ 12VDC setting, via VR switch, 23~25 @ 24VDC setting, via VR switchNumber of Outputs1Total Supply Current5A@12VDC / 2.5A@24VDCInput Fuse Rating3.15A ( glass fuse, AC)LED Status IndicatorAC input ( Green ), DC Output ( Red )24VDC Output (Blue)End-of-Line Resistor (EOL)Selectable ON ( 2.2KΩ) or OFF , 3A@24VDC dry relay outputDownloadDatasheetManual