Seco-Larm – 5 O/P Power Distribution Board for EAP-5D5Q

ThePD-5PAQ5-output power distribution board centralizes the power sources for access control electronic locking devices, such as electromagnetic locks, sheer locks, electric door strikes, deadbolt locks, and so on. It provides a separate fuse for each output so that problems with one device may be isolated from the other devices. Each output operates in both fail-safe and fail-secure modes. The board includes wet and dry trigger inputs for emergency door activation such as for releasing emergency exit doors. It is also equipped with power failure supervision relays and auxiliary supervision relays. Five individually PTC-fused outputs Each output will operate in both fail-safe and fail secure modesOutput fuses rated 1.1 AmpsIndividual LED status indicator for each output, power input, and triggerFor 12VDC or 24VDC operationPower failure supervision relay (3 Amps @ 24VDC)Auxiliary supervision relay (3 Amps @ 24VDC)Equipped with dry and wet trigger inputsDimensions – 39/16″x55/16″x11/16″ (90 x 135 x 27 mm)Input Voltage12/24 VDCFuse typePTCOutput Voltage12 or 24VDC selectable via DIP switchAdjustable Output Voltage Range11~15 @ 12VDC setting, via VR switch, 23~26 @ 24VDC setting, via VR switchNumber of Outputs5Total Supply Current5A@12VDC / 2.5A@24VDCOutput fuse rating1.1AEnd-of-Line Resistor (EOL)Selectable ON (2.2KΩ) or OFF via DIP switchAC-Fail Relay Delay TimerSelectable @ 5sec, 5min or 5hr via DIP switchSupervision RelaysContact Rating: 3A@24VDC Dry Relay OutputDownload:DatasheetManual