*Discontinued* Seco-Larm – Plug-and-Play Backup Power – In-line Backup Power

SLM-SB-L10V1-20QENFORCER Plug-and-Play Backup Power units provide backup power to power devices during temporary power outages. Installs between the original power adapter and the powered device and auto-selects 5, 7.5, 9, or 12VDC.Real-time backup power with no break when input power is lostDC UPS Auto-startBatteries provided by GE (2600mAh user-replaceable Lithium Ion – SB-P1012-26Q /2000mAh lithium polymer – SB-L10V1-20Q)Over-discharge, overcharge, overload, short-circuit, and surge protection on input and outputLED indicators for power and backup operationAuto-recognizes voltage (5/7.5/9/12VDC) input and sets corresponding outputAdditional indicator LEDs for output voltage and an audible/visible (LED) alarm warning of an overload, voltage issue, or low batteryTypeIn-line UPSInput5/7.5/9/12VDC±10%Input ProtectionOverload and short-circuit fuseInput Jack Type5.5 x 2.1 mm DC JackOutputAuto-configure 5/7.5/9/12VDC±5%Output Power Rating10WOutput ProtectionOver-discharge, overload, short-circuit protectionBatteryGE Lithium Polymer 3.7VDC/2000mAhBattery ProtectionOvercharge, over-discharge, overload, short-circuitBackup TimeHalf Load- 60 min, Full Load- 25 minLED IndicatorsVoltage, power, alarm, backupOutput Cord12″ (30.5cm)Output Plug5.5×2.1mm DC plugOperating Temperature32~104°F (0~40°C)Operating Humidity0~95% non-condensingDimensions3-3/8″ x 2-1/4″ x 1-21/32″ (85 x 57 x 42 mm)Weight4.3-oz (121g)