Adams Rite – 8611 – Narrow Stile- Concealed Vertical Rod Exit Device – 36″ – Anodized Aluminum

ADR-8611-36The 8600 Series Concealed Vertical Rod Exit Device is designed for narrow stile aluminum applications that require a lifesafety exit device with concealed vertical rods for two-point locking. Designed for use in applications with single doors or pairs of doorsMore Details Below NOTE: This Item Does NOT Qualify for FREE Shipping- Please contact your sales representative to get shipping costs. Call 1-800-878-6604 between Monday and Friday, 9AM-6PM ESTFeaturesCertifications UL 305 Panic hardwareANSI/BHMA A156.3-2008 Grade 1ANSI/BHMA A156.3-2014 Grade 2MaterialsPush bar made of extruded aluminum,clad or anodized in a variety of finishesHandingDevice is non-handed.Push bar LengthStandard size: 36″ [914.4 mm] Standard width bars can be field cut to the next smallest opening width.Bar HeightStandard model adjusts from 30″ [762 mm] to 44″ [1117.6 mm].Door ThicknessSuits 1-3/4″ [44.5 mm] standard, up to 2-1/4″ [57.2 mm]. Device requires modification when used with cylinder in doors over 1-3/4″ [44.5 mm].Door HeightStandard configuration suitable for doors up to 66″ [1,676.4 mm] above the selected bar height.For doors over 66″ [1,676.4 mm] above bar height, up to 10′ [3.05 m] use 8655 Tall Door Kit SOLD SeparatelyStile WidthMinimum 2″ [50.8 mm] stile. Fits narrow, medium, and wide stile aluminum doorsProjection2-5/8″ [66.7 mm] when fully projected,1-5/8″ [41.3 mm] when dogged.DoggingStandard dogging with hex key or optional cylinder dogging. FastenersStandard machine screws.CylindersAccepts any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam.r. Accommodates cylinder lengths from 1″ [25.4 mm] to 1-1/4″ [31.8 mm] Cylinder x Fixed Pull FunctionsFor entry trim function 03 (Night latch – key releases latch) select any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam such as the 4036 Mortise Cylinder. Accepts any standard mortise cylinder with MS® cam. If key entry operation is required, any standard mortise cylinder with MS® cam can be installed through an 8650 Cylinder Escutcheon. 8650 Cylinder Escutcheon Kit available separately.Entry Trim FunctionsFor entry trim function 08 (key locks/unlocks lever) or function 09 (key releases lever) select any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam such as the 4036 Mortise Cylinder. Accommodates cylinder lengths from 1″ [25.4 mm] to 1-1/4″ [31.8 mm]. Available separately.Bolts and StrikesThe patented top latching mechanism utilizes a rotating top bolt which deadlatches around the header strike, interlocking the door to the frame. Supplied with standard header strike. Adjustable protected steel rods. The hexagonal, hardened steel bottom bolt is shielded in a cast housing for strength and stability. Download Installation Instructions Here